2009

■ When the door is centered in the exterior corridor wall between the left and right interior
corridor walls, click to place the door.
9 Add an exterior door to each stairway:
■ On the Getting_Started tool palette, click the Hinged - Single - Exterior door tool.
■ On the Properties palette, under Dimensions, for Standard sizes, select 3'-0'' X 7'-0'' [900 mm
X 2000 mm].
■ Under Location, for Position along wall, select Offset/Center.
■ For Automatic offset, enter 10'' [200 mm].
■ In the upper left corner of the building, select the top horizontal exterior wall.
■ Move the cursor along the wall until the dynamic dimensions display the door as offset 10''
[200 mm] from the exterior vertical wall on the right.
■ Click to place the door.
20 | Chapter 1 Getting Started