2009

Because you selected Offset/Center for the Location property of the door, dynamic dimensions
display the door as centered in the wall, or as offset an automatic distance from the end of
the wall segment.
■ Move the cursor horizontally.
By moving the cursor horizontally, you can change the swing side of the door.
■ When the door is centered in the wall, and the door swings into the corridor, click to place
the door.
8 Add a sliding double door to the top exterior wall of the corridor above the one to which you
added a double door:
■ On the Getting_Started tool palette, click the Sliding - Double - Full Lite door tool.
■ On the Properties palette, under Dimensions, for Standard sizes, select 8'-0'' X 6'-8'' [1800
mm X 2000 mm].
■ Under Location, for Position along wall, select Offset/Center.
■ Select the top exterior wall of the corridor.
Laying Out a Floor Plan | 19