2009

Creating Color-Filled Presentation Plans
In this exercise, you use a display theme to rapidly create a graphic report of the spaces. When you create
the report, the space data is read, and the spaces fill with color depending on the current report criteria. A
legend that you place near the color-filled floor plan represents the theme and indicates the colors used in
the plan.
1 On the Project Navigator, click the Views tab.
2 Create a view that references the 01 Spaces construct:
■ Right-click the Views folder, and click New View Dwg ➤ General.
■ In the Add General View dialog, for Name, enter 01 Space Plan, and click Next.
■ For Level 1, select Division 1, and click Next.
■ Clear all constructs except 01 Spaces.
■ Select Open in drawing editor, and click Finish.
■ Zoom Extents to see the 01 Space Plan in the drawing area.
3 Create a display theme that identifies the spaces by size:
■ On the Getting_Started tool palette, click the Theme - Space Size tool.
■ Specify a point to the left of the room schedule to place the upper left corner of the legend.
■ Press ENTER to place the legend.
Creating Color-Filled Presentation Plans | 15