2008

Making Floor Plan Revisions
In this exercise, you make several revisions to the 01 Floor plan. You take advantage of the many features of AutoCAD
Architecture that make it easy to adjust any of the objects in your design. To edit the objects on your floor plan, you
can change object properties, use object grips, or use dynamic dimensions.
1 On the Constructs tab of the Project Navigator, double-click the 01 Floor construct.
The interior doors on the floor plan, Hinged - Single - Full Lite, contain a pane of glass. This type of door
is not suitable for either the storage room or the restroom. Rather than changing only the storage and
restroom doors, you decide to replace all the interior doors on the floor plan with a solid door type.
2 Change the style of 1 of the interior doors on the floor plan:
■ On the Getting_Started tool palette, right-click the Hinged - Single door tool, and click Apply Tool
Properties to ➤ Door.
■ Select an interior door on the floor plan, and press ENTER.
■ On the Properties palette, under General, for Style, view the new Hinged - Single style that is applied
to the door.
■ Press ESC to hide the door grips.
3 Change the style of the remaining interior doors:
■ Select another door that has the Hinged - Single - Full Lite style applied to it, right-click, and click
Select Similar.
■ On the Properties palette, under General, for Style, select Hinged - Single.
■ Press ESC to hide the door grips.
4 Flip the hinge side of an interior door:
■ Select the door in the bottom wall of the large office next to the copy room.
Making Floor Plan Revisions | 27