2008

■ In the Edit Property Set Data dialog, click OK.
4 Verify that the door tags are numbered sequentially. If they are not, use the Renumber Data Tool on the
Getting_Started tool palette to renumber the tags:
■ Click the Renumber Data Tool.
■ In the Data Renumber dialog, for Property Set, verify that DoorObjects is selected.
■ For Property, verify that Number is selected.
■ For Start Number and Increment, verify a value of 1.
■ Click OK, select the curtain wall entry door and the other doors on the plan, and press ENTER.
5 Create the door schedule:
■ On the Getting_Started tool palette, click the Door Schedule tool.
■ On the Properties palette, under Selection, for Scan xrefs, verify that Yes is selected.
■ On the command line, enter all, and press ENTER twice.
■ Specify a point on the left side of the floor plan view to place the upper-left corner of the schedule.
■ Press ENTER to place the schedule at the current drawing scale.
■ Zoom to a line on the schedule, and view the door information.
6 Tag the windows on the floor plan view to include them in a separate window schedule:
■ On the Getting_Started tool palette, click Window Tag.
Creating Schedules | 25