2008

Because you selected Offset/Center for the Location property of the door, dynamic dimensions display
the door as centered in the wall, or as offset an automatic distance from the end of the wall segment.
■ Move the cursor horizontally.
By moving the cursor horizontally, you can change the swing side of the door.
■ When the door is centered in the wall, and the door swings into the interior of the corridor, click to
place the door.
8 Add a sliding double door to the top exterior wall of the corridor above the one to which you added a
double door:
■ On the Getting_Started tool palette, click the Sliding - Double - Full Lite door tool.
■ On the Properties palette, under Dimensions, for Standard sizes, select 8'-0'' X 6'-8'' [1800 mm X 2000
mm].
■ Under Location, for Position along wall, select Offset/Center.
■ Select the top exterior wall of the corridor.
18 | Chapter 1 Getting Started