Installation guide

To install AutoCAD Civil 3D using default values on a stand-alone computer
This is the fastest means of installing AutoCAD Civil 3D on your system. Only
default values are used which means it is a typical installation being installed
to C:\Program Files\<AutoCAD Civil 3D>.
1 Insert AutoCAD Civil 3D 2010 disc 1 into DVD-ROM drive.
2 In the AutoCAD Civil 3D Installation wizard, click Install Products.
3 Select the products you want to install. Click Next.
NOTE Autodesk Design Review 2010 is installed by default when you install
AutoCAD Civil 3D. It is recommended that you install Design Review if you
need to view DWF or DWFx files. For more information about Design Review,
see Installing Design Review.
4 Review the Autodesk software license agreement for your country or
region. You must accept this agreement to proceed with the installation.
Select your country or region, click I Accept, and then click Next.
NOTE If you do not agree to the terms of the license and want to terminate
the installation, click Cancel.
5 On the Products and User Information page, enter your serial number,
product key, and user information. Review the Privacy Policy from the link
at the bottom of the dialog box. After reviewing, click Next.
Installing AutoCAD Civil 3D | 7