User`s guide
Table Of Contents
- Introduction
- Chapter 1: Taking the AutoCAD Tour
- Chapter 2: Creating Basic Drawings
- Chapter 3: Manipulating Objects
- Lesson: Selecting Objects in the Drawing
- Lesson: Changing an Object's Position
- Lesson: Creating New Objects from Existing Objects
- Lesson: Changing the Angle of an Object's Position
- Lesson: Creating a Mirror Image of Existing Objects
- Lesson: Creating Object Patterns
- Lesson: Changing an Object's Size
- Challenge Exercise: Grips
- Challenge Exercise: Architectural
- Challenge Exercise: Mechanical
- Chapter Summary
- Chapter 4: Drawing Organization and Inquiry Commands
- Chapter 5: Altering Objects
- Lesson: Trimming and Extending Objects to Defined Boundaries
- Lesson: Creating Parallel and Offset Geometry
- Lesson: Joining Objects
- Lesson: Breaking an Object into Two Objects
- Lesson: Applying a Radius Corner to Two Objects
- Lesson: Creating an Angled Corner Between Two Objects
- Lesson: Changing Part of an Object's Shape
- Challenge Exercise: Architectural
- Challenge Exercise: Mechanical
- Chapter Summary
Lesson: Using Inquiry Commands ■ 349
Answers to Exercise Questions
Step
Answer
3.
Distance = 55 mm
Angle = 212 degrees
4.
Radius for circle 2 = 17.25
mm
Radius for circle 4 = 10.00
mm
5.
Object type =
LWPOLYLINE
Area = 1764.00
mmPerimeter = 318.00
mm
9.
Distance between circles
2 and 3 = 103.9447 mm
Distance between circles
2 and 4 = 105.6296 mm
11.
Angle = 131 degrees
Delta Y = 44.9275 mm
13.
X
= 253.1353Y
= 0.0000Z = 0.0000
14.
Net area = 24255.3940
mm