User`s guide

Lesson: Creating Object Patterns ■ 225
8. Specify the unit cell as indicated:
■ Click the endpoint of the line of the lower
interior wall.
■ For the other corner, click the endpoint of
the line of the upper interior wall.
■ Click Preview.
■ Your rectangular array should appear as
illustrated.
■ Do not press ENTER.
■ Use the wheel on the mouse to adjust the
display of your drawing.
■ If necessary, press ESC to return to the
dialog box and reselect the unit cell,
or press ENTER to complete the Array
command.
9. Close all files. Do not save.
Exercise: Array Objects in the Drawing
(Imperial Units)
1. Open I_Creating-Arrays.dwg.
2. To create a polar array, zoom into the area
shown in the following image.
3. To create an array of the chair around the
table:
■ On the Home tab, click Modify panel >
Array.
■ In the Array dialog box, click Polar Array (1).
■ Click Select Objects (2). Select the chair.
■ Press ENTER to return to the dialog box.