User`s guide
Table Of Contents
- Introduction
- Chapter 1: Taking the AutoCAD Tour
- Chapter 2: Creating Basic Drawings
- Chapter 3: Manipulating Objects
- Lesson: Selecting Objects in the Drawing
- Lesson: Changing an Object's Position
- Lesson: Creating New Objects from Existing Objects
- Lesson: Changing the Angle of an Object's Position
- Lesson: Creating a Mirror Image of Existing Objects
- Lesson: Creating Object Patterns
- Lesson: Changing an Object's Size
- Challenge Exercise: Grips
- Challenge Exercise: Architectural
- Challenge Exercise: Mechanical
- Chapter Summary
- Chapter 4: Drawing Organization and Inquiry Commands
- Chapter 5: Altering Objects
- Lesson: Trimming and Extending Objects to Defined Boundaries
- Lesson: Creating Parallel and Offset Geometry
- Lesson: Joining Objects
- Lesson: Breaking an Object into Two Objects
- Lesson: Applying a Radius Corner to Two Objects
- Lesson: Creating an Angled Corner Between Two Objects
- Lesson: Changing Part of an Object's Shape
- Challenge Exercise: Architectural
- Challenge Exercise: Mechanical
- Chapter Summary
Lesson: Using Polar Tracking and PolarSnap ■ 119
Drafting Settings Dialog Box: Polar Tracking Tab
Use the following options to control various aspects of the polar tracking feature.
Select to turn on polar tracking. You can also press F10 to toggle polar tracking on or off.
Select an angle from the list to increment the polar alignment paths as the cursor approaches the
selected angle.
Select to snap to the additional angles defined in the list.
Click to define an additional PolarSnap angle.
Click to delete the selected angle in the Additional Angles list.
Click to display the angle of the alignment path as an absolute angle in the current coordinate system.
Click to display the angle of the alignment path relative to the last segment drawn.