Specifications

20
www.autodesk.com/autocad
In addition to the Chain option, the FILLETEDGE and the CHAMFEREDGE command include a Loop
option. A loop is similar to a closed chain. After selecting an edge, you can choose which of the potential
loops to use.
Offset Edge
The new Offset Edge tool, available on the Solid Editing panel, enables you to create an offset curve from
a planar face or from a surface where all the edges lie on the same plane. After you select a face, the edge
of the face is dynamically offset to the inside or outside based on cursor location producing a polyline or
spline. During the offset operation, you can access the Corner option to specify sharp or rounded corners
for the offset curve. After offsetting an edge, you can use the Presspull tool to easily add or remove the
bounded area from a solid.
Presspull Functionality
Presspull functionality provides an easy way to create and edit solids. You simply click in a bounded area
of a solid and AutoCAD dynamically creates an extruded solid. If the bounded area is the face of a solid,
the extrusion is added or removed from the solid. In AutoCAD 2012, powerful Presspull functionality has
been updated to repeat until you exit the command enabling you to quickly press and pull multiple times
in a single operation.