Technical information

Working with Alignments | 87
Making an Alignment Current
When you work with alignments, make sure that the correct alignment is
current. Alignment commands work only with a current alignment, and only
one alignment can be current at a time. When you define an alignment, it
becomes the current alignment automatically.
You can select the current alignment either from a drawing, from the
Alignment Librarian, or by alignment number.
To display the Alignment Librarian, as shown in the following illustration,
choose Set Current Alignment from the Alignments menu and when you are
prompted to select an alignment, press
ENTER.
To make an alignment current
Steps
Use to locate
1 From the Alignments menu, choose Set
Current Alignment.
The cursor turns into a pickbox.
Making an Alignment
Current