Technical information

214 | Chapter 15 Creating Plan, Profile, and Cross Section Sheets
The following illustration shows the settings that affect the layout of
generated cross section sheets.
To create a section sheet series
Steps Use to locate
1 Create finished ground cross sections using the
commands in the Cross Sections menu.
You do not need to plot the cross sections in the drawing.
Working With Cross
Sections
2 Select the current alignment and profile. Making an Alignment
Current
Making a Profile Current
3 From the Sheet Manager menu, choose Settings, and
then click Section Preferences to set the cross section
sheet settings.
These settings control margins, scales, and volume
calculation methods.
Changing Cross Section
Sheet Preferences
4 From the Sheet Manager menu, choose Section
Sheets
➤ Generate Section Sheets to display the Set
Current Series Name dialog box.
Generating a Cross Section
Sheet Series
5 Enter a name for the series and then click OK to display
the Edit Section Sheet Series Data dialog box.