Technical information

212 | Chapter 15 Creating Plan, Profile, and Cross Section Sheets
6 Click OK to place the view definition rectangles along the
alignment.
Each view definition represents one sheet that is created,
as shown in the following illustration.
7 Edit the layout, if necessary, from the Sheet Manager
menu, by choosing Plan/Profile Sheets
➤ Edit Sheet
Layout.
You can move and rotate the view definitions that were
placed over the alignment to control the parts of the
alignment and profile that appear on each sheet.
Editing a Plan/Profile Sheet
Layout
8 From the Sheet Manager menu, choose Plan/Profile
Sheets
➤ Generate Sheet – Series to generate the sheet
series.
Generating a Series of Plan/
Profile Sheets
9 You can view one sheet at a time by loading it. From the
Sheet Manager menu, choose Plan/Profile Sheets
➤ Load
Sheet – Individual.
The Sheet Manager
➤ Plan/Profile ➤ Load Sheet – Series
command can load up to 255 sheets into the current
drawing. Each sheet is placed on its own layout tab.
Loading a Generated Plan/
Profile Sheet
Loading a Plan/Profile Sheet
Series
10 From the Sheet Manager menu, choose Plot
➤ Edit Batch
Plot Job to select a group of sheets to plot.
Batching Plot Sheets
11 From the Sheet Manager menu, choose
Plot ➤ Run Batch
Plot Job to plot the sheets.
Running a Batch Plot Job
To create a plan/profile sheet series (continued)
Steps Use to locate