Technical information

Drafting Finished Pipe Runs in Plan View | 199
4 From the Pipes menu, choose Finish Draft Plan ➤ Draw
Pipes, and then select the pipe run.
You can select the pipe run from the drawing by clicking
on it, or you can press
ENTER to display the Defined Runs
dialog box where you can select the run.
Creating Finished Draft
Runs in Plan View
5 Specify the layers for the finished plan pipe run labels.
6 Specify the option for placing the structure labels: Picking
or Offset.
If you choose the picking option, then you are prompted
to locate each structure label as it is drawn.
7 Specify whether or not you want to rotate each structure
as it is inserted in the drawing.
The finished plan pipe run is drawn, as shown in the
following illustration.
To draft a finished plan pipe run (continued)
Steps Use to locate