Technical information

Working with the Pipes Run Editor | 197
Working with the Pipes Run Editor
You can use the Pipes Run Editor to modify a conceptual pipe run in a
dynamic spreadsheet format dialog box. You can use this dialog box to adjust
pipe sizing and flow rate parameters of the pipe runs.
You can choose the columns of information that you want to display in the
Pipes Run Editor. You can select one of the defined views from the View list
to view specific column groupings. For example, you can pick the Node view
to view the columns that only pertain to nodes.
Changes that you make in relevant cells of the spreadsheet affect data in
other parts of the spreadsheet. For example, increasing the flow rate values
in the Pipe Flow column results in increases in the values found in the Pipe
Size column, as well as changes to values in the Design Flow, Design Velocity,
and Design Depth columns.
Key Concepts
■ Pipe run nodes are listed by northing/easting coordinates, station and
offset (if applicable), and node labels.
■ Structures at nodes are listed with rim and sump elevations, node and
sump drop values, and structure type and dimensions, including structure
wall thickness values.