Product data

46
Autodesk Design Review Getting Started Guide
Georeferenced Maps
In Design Review , sheets with defined latitude and longitude
coordinates published from AutoCAD
®
Map D  or AutoCAD
®
Civil D
®
 can interact with GPS devices that use the NMEA
 protocol.
When a georeferenced map is displayed on the canvas, the Map
Toolbar is displayed directly below the canvas.
. To view published map coordinates, move the mouse pointer
over the map. The current coordinates of the mouse pointer
are shown on the Map Toolbar. (Figure L)
. To center on coordinates, on the Map Toolbar, click the Center
to Coordinates button and click on the map. The map cen-
ters on the entered coordinates, and the Coordinate icon is
shown over the entered coordinates. You can also select the
Map Menu button and choose Enter Coordinates, then
type or copy and paste the desired coordinates.
. To identify your current location, you must also be connected
to a GPS Device.
• Configure you GPS device by choosing Tools > Options, and
selecting the GPS tab. Then walk through the setup steps.
• On the Map Toolbar, click the GPS Mode button . The My
Coordinates icon indicates your current location on the
georeferenced map.
Georeferenced Maps
Figure L The Map toolbar displays the latitude and longitude.