Product data

42
Autodesk Design Review Getting Started Guide
text instructions and parts lists and are meant for use in a
manufacturing setting to provide clear and concise instructions
in conjunction with Design Review’s View Animations feature.
• Design Review allows you to view Bill of Materials or other
Tabular Data, in a published table, about individual parts that
combine to create a component assembly or sub-assembly.
• Use the Arrange Display Areas tool to select your chosen
layout to view the information shared by the designer.
• The Canvas Pane in the lower right section of the Design
Review window displays assembly instructions and bill of
materials information. (Figure F)
. You can Measure D DWF files just as you measured DWF files in
Step  of the tutorial. In D, you can measure:
• Length and relative distances between points, edges, center
points, or any combination of these
• Angles between lines, planes, and edges.
• Length, radius of an arc, or the diameter or radius of a circle
• Point location relative to currently active coordinate system,
or to a user-defined coordinate system.
The units of measurement can be Imperial (feet and inches) or
metric, and they can be up to five decimal places in precision,
depending on the precision set by the author of the DWF.
(Figure G)