Datasheet

ISOGEN PCF Output
Use the piping component file (PCF) output to
reduce errors by automatically creating isometric
pipe drawings with third-party applications. Create
PCF files to use as an interface to the industry-
standard Alias ISOGEN software. Based on the
PCF input file, ISOGEN creates a DXF™ or DWG
file containing the isometric drawings.
Tube and Pipe Styles
Increase the quality and manufacturability of
designs by helping to ensure that tube and pipe
runs automatically adhere to preset design
standards. Create tube and pipe styles to
support the use of threaded, welded, and flanged
connections. Styles define the fittings to be
used for both automatic and manual routing, and
enforce design rules, including minimum segment
lengths and minimum bend radii, as wells as the
maximum length between couplings.
Assembly Documentation
Quickly and easily include accurate details about
tubing, piping, and hose locations in assemblies.
Since all the tube and pipe geometry is native to
Inventor, users can easily create assembly documen-
tation using standard Drawing Manager functions.
Tubing Bend Tables
Save time and reduce errors by automatically
generating bend tables based on D data. Create
nonassociative ASCII bend tables in standard XYZ
or YBC formats to provide details to manufacturing.
Branch Fittings
Extend piping models to include threaded and
welded branch fittings. Select a branch fitting from
the Content Center and place it onto a pipe run
using interactive controls to define the linear and
circumferential position. Branch fittings added
in this way automatically generate the correct
attachment hole in the existing pipe.
Route and Run Copy
Increase productivity by quickly and easily reusing
complete pipe routings from a previous design.
Tube and Pipe Design
www.rand.com/imaginit/autodeskinventor