8

Reference Geometry Rollout (Projection Modifier) 763
Select SG—
To select by smo othing group value,
usethespinnertosetthenumberofthesmoothing
group, and then click Select SG.
Select MatID—To select by material ID, use the
spinner to set the ID number, and then click Select
MatID.
•
Sub-material dr op-down list—When a
multi/sub-object material is applied to the
low-resobject,thislistshowsthenamesand
numbers of sub-materials that are assigned
tofacesorelementsoftheobject. Whenyou
have selected by material ID, the corresponding
sub-material appears in the field above the list.
Clear Sel ection—Whenon,eachstack,smoothing
group, or material ID selection you make replaces
the previous selection. When off, each new
selection is added to the previous selection set.
Default=on.
Reference Geometry Rollout
(Projection Modifier)
Select an object. > Modify panel > Modifier List >
Object-Space Modifiers > Projection > Re ference
Geometry rollout
On the Reference geometry rollout, you can create
named sub-object selection sets, and associate
them with high-resolution geometry.
Interf ace
Name—Lets you enter a name for the current set
of selected sub-objects.
Delete—Click to delete the sub-object
selectionsetwhosenameishighlightedinthelist.
Add—Click to add the named sub-object
selection set to the list.
Keyboard shortcut: ENTER.
Select—Click to select the sub-objects in the
selectionsetwhosenameishighlightedinthelist.
Delete All—Click to delete all named
sub-object selection sets in the list.
Reference geometry window—This window shows
a list of named sub-object selection sets, and the
high-resolution source geometry with which