8

682 Chapter 8: Modifiers
Fillet applied to above star with rad ius of 20 (left) and
40 (right)
Chamfer applied to a bove star with distance of 20
Procedure
Example: To fillet/chamfer a sta r:
1.
Create a Star shape (page 1–272) .
2. Apply a Fillet/Chamfer modifier.
3. Select one or more of the star’s vertices.
4. Adjust the parameters to achieve different
effects.
Interf ace
Fillet group
Radius—Specifies the radius of the filleted corner.
Apply —AppliesthevaluespecifiedintheRadius
spinner to selected vertices. For example, before
selecting any vertices, set the Radius to the desired
value, then select your vertices and click Apply to
fillet the selection with the specified radius.
Chamfer group
Distance—Specifies the distance of the new vertices
from the original corner vertex.
Apply —Applies the value specified in the Distance
spinner to selected vertices. For example, before
selecting any vert ices, set Distance to the desired
value, then select your vertices and click Apply to
chamfer the corners.