8

ChamferCyl Extended Primitive 187
Inter face
Creation M ethod rollout
Cube—Forces length, width, and height to be
equal. You can change a cube’s individual
dimensions in the Parameters rollout.
Box—Creates a standard chamfered box primitive
from one corner to the diagonally opposite corner,
w ith individual settings for length, width, and
height.
Parameters rollout
Length, W idth, Height—Sets the corresponding
dimensions of the chamfered box.
Fillet—Slices off the edges of the chamfered box.
Higher values result in a more refined fillet on the
edges of the chamfered box.
Length, Width, Height S egs—Sets the number of
divisions a long the corresponding axis.
Fillet Segs—Sets the number of segments in the
filleted edges of the box. Adding fillet seg ments
increases the edge roundness.
Smooth—Blends the display of the faces of the
chamfered box, creating a smooth appearance in
rendered views.
Gener ate M apping Coords—Generates coordinates
for apply ing mapped m aterials to the chamfered
box. Default=on.
Real-World M ap Size—Cont rols the scaling
method used for texture mapped materials that
areappliedtotheobject.Thescalingvaluesare
controlled by the Use Real-World Scale settings
found in the applied material’s
Coordinates rollout
(page 2–1434)
. Default=off.
ChamferCyl Ex tended Primitive
Create panel > Geom etry button > Extended Primitives >
Object Type rollout > ChamferCyl butto n
Create menu > Extended Primitives > Cham fer Cylinder
Use ChamferCyl to create a cylinder with be veled
or rounded cap edges.
Examples of chamfered cylinders
Procedure
To create a chamfer ed cy li nder :
1.
FromtheCreatemenu,chooseExtended
Primitives > Chamfer Cylinder.