8

General Panel (Object Properties Dialog) 115
Edges Only—Toggles the display of hidden edges
and polygon
diagonals (page 3–1022) .Whenon,
only outside edges appear. When off, all mesh
geometry appears. Applies to Wireframe v iewport
display mode, as well as other modes with Edged
Faces turned on.
Note: This option is also available in the Display
panel (page 3–818)
and by choosing Tools >
Display Floater (page 3–818) .
Vertex Ticks—Displays the object’s vertices as tick
marks. Default=off.
Note: This option is also available in the Display
panel (page 3–818)
and by choosing Tools >
Display Floater (page 3–818) .
Traject ory—Displays the o bject’s trajectory (page
3–1119)
. Default=off.
Note: This option is also available in the Display
panel (page 3–818)
and by choosing Tools >
Display Floater (page 3–818) .
Ignore E x tents—When on, this object is ignored
when you use the display control
Zoom Extents
(page 3–780)
.
Note: This option is also available in the Display
panel (page 3–818)
and by choosing Tools >
Display Floater (page 3–818) .
K eyboard shortcut: No default, but you can
customize it us ing the
Keybo ard panel (page
3–837)
of the Customize > Customize User
Interface dialog (page 3–836)
.
Show Frozen in Gray —When on, the object turns
gray in v iewports w hen you freeze it. (This is how
all frozen objects appeared in versions prior to
v4.) When off, viewpor t s display the object with