2009

Value Display
Track View > Curve Editor or Dope Sheet > Key Stats: Track View toolbar >
Value Display (field on right)
Value Display (the field on the right) displays the value, or position in space,
of a highlighted key. This is an editable field. You can enter a new number or
expression to change the value of selected keys.
Procedures
Example: To move an object in space using Value Display:
1 In the Track View (either mode) Hierarchy list, expand the Position track
of an animated object. In Curve Editor mode, if Show Non-Selected Tracks
is not active, highlight a track, if necessary, so the keys are visible.
2 Highlight an X, Y, or Z Position key.
The Value Display shows the X, Y, or Z position key spatial value.
3 Enter the value you want in the Value Display and press Enter.
The new value takes effect. If the time slider is at or near the same frame
as the key, the change is visible in the viewports.
Example: To add 10 to the values of specific keys:
1 In Track View, either mode, highlight the keys to edit.
2 In the Value Display field, enter n+10.
Each key's value is incremented by 10. Simply entering 10 would give
each key a value of 10.
Show Selected Key Statistics
Track View > Curve Editor > Key Stats: Track View toolbar > Show Selected
Key Stats
3680 | Chapter 15 Animation