2009

Identity for an ease curve produces an effect similar to constant for other types
of curves. Identity is not available for multiplier curves; it is the default
Out-of-Range type for ease curves.
Multiplier Curve Out-of-Range Types
Track View > Curve Editor > Curves menu > Multiplier Curve Out-of Range
Types
Multiplier Curve Out-of-Range Types displays a dialog that lets you assign
out-of-range types for the current
multiplier curve on page 8056.
Ease and multiplier curves use the same out-of-range types as other function
curves.
You will usually want to use the same out-of-range type for a multiplier curve
that you use for its superior function curve.
Procedures
To set the out-of-range type for a multiplier curve:
1 Highlight one or more multiplier curve items in the Hierarchy list.
2 From the Curves menu choose Multiplier Curve Out-of-Range Types.
3 Do one of the following.
■ Click an out-of-range type image to apply that type to both the
incoming and outgoing curves of the multiplier curve.
■ Click the left arrow button below an out-of-range type image to apply
it to only the incoming curve of the multiplier curve.
■ Click the right arrow button below an out-of-range type to apply it
to only the outgoing curve of the multiplier curve.
Curve Editor | 3665