2009

Procedures
To toggle the active state of an ease or multiplier curve:
1 In the Hierarchy list, highlight one or more ease or multiplier curves.
2 From the Curves menu choose On/Off.
If you also have the parent track selected (the transform that has the ease
applied), you will see the difference in the curve when you turn the ease
or multiplier off.
Ease Curve Out-of-Range Types
Track View > Curve Editor > Curves menu > Ease Curve Out-of Range Types
Ease Curve Out-of-Range Types displays a dialog that lets you assign
out-of-range types for the current
ease curve on page 7960.
Ease and multiplier curves use the same out-of-range types as other controller
tracks. See Parameter Curve Out-of-Range Types on page 3601.
You will usually want to use the same out-of-range type for an ease curve that
you use for its superior function curve.
Procedures
To set the out-of-range type for an ease curve:
1 Highlight one or more ease curve items in the Hierarchy list.
2 From the Curves menu choose Ease Curve Out-of-Range Types.
3 Do one of the following.
■ Click an out-of-range type image to apply that type to both the
incoming and outgoing curves of the ease curve.
■ Click the left arrow button below an out-of-range type image to apply
it to only the incoming curve of the ease curve.
■ Click the right arrow button below an out-of-range type to apply it
to only the outgoing curve of the ease curve.
Curve Editor | 3663