2009

Scale Values
Main Track View > Curve Editor > Track View toolbar > Scale Values
Track View > Curve Editor > Keys menu> Scale Values
Scale Values is used to proportionally increase or decrease the vertical distance
between selected keys on the function curves in Curve Editor. It uses the
Scale
Origin Line
on page 3517 as a movable reference point for the scale operation.
Practically speaking, scaling values always creates spatial adjustments, rather
than temporal. To scale in time, use Scale Time on page 3636 instead.
NOTE Scale Values is not available in Dope Sheet mode.
Procedures
To scale key values:
1 Select an object in the viewport, then right-click and choose Curve Editor.
2 Highlight one or more tracks, if necessary, and then highlight the keys
you want to scale.
3 On the Curve Editor toolbar, click Scale Values.
The orange Scale Values Origin line appears at the 0 location on the
vertical scale.
4 Drag the Scale Values Origin line to where you want to scale values from
or to.
5 Drag any highlighted key vertically to scale all of them.
TIP If you use Lock Selection on page 3609 after highlighting the keys, you
can drag anywhere in the Key window to create the scale operation.
Add Keys (Curve Editor)
Track View > Curve Editor > Track View toolbar > Add Keys
Curve Editor | 3655