2009

5 From the Keys menu, choose Reduce Keys.
The Reduce Keys dialog appears. This dialog has a single Threshold
parameter.
Raising the Threshold setting will increase the number of keys that are
reduced. The higher the threshold, the greater the reduction.
6 Click OK to reduce the keys.
Observe the results. If you are left with too few keys, press Ctrl+Z to undo,
then lower the threshold and reduce the keys again. If too many keys
remain, increase the threshold and reduce keys again.
TIP It will take repeated experimentation to find exactly the right threshold
for your particular animation.
Interface
Reduce Keys Displays the Reduce Keys dialog.
Threshold Sets a threshold value. Higher values will result in fewer keys.
OK Accepts the Threshold setting and reduces keys as follows:
■ Keys are reduced only in highlighted tracks.
■ If any of a track's keys are highlighted, reduction is performed only within
the indicated range (that is, between the leftmost and rightmost highlighted
key for each track). If no key is highlighted, reduction is performed on all
keys in the track.
Edit Time | 3641