2009

Interface
Start Time Specifies the start range for selecting keys.
End Time Specifies the end range for selecting keys.
The Start Time and End Time spinners are activated to match the current time
selection.
Clear Previous Selection Clears all keys before keys within the specified time
range are selected.
In Dope Sheet mode, highlight a single track to select all keys in the
descendants of the track. Modify Subtree must be on for this to work.
Euler Filter
Track View > Utilities menu > Track View Utilities > Euler Filter
This Track View utility corrects for gimbal flipping (anomalous rotation
animation) in objects animated using
Euler rotation on page 3151 by processing
existing animation keys in selected animated tracks. It's particularly useful for
cleaning up rotation artifacts when importing raw motion-capture data. This
process does not break any keyed orientations.
By default, the utility modifies only frames with keys on all three tracks (X,
Y, and Z). By turning on Add Keys If Needed, you can perform the correction
on frames with X, Y, and Z keys and also add keys at frames that contain only
one or two keyed axes but require correction, resulting in X, Y, and Z keys at
those frames.
The default range for filtering is the current active range for the scene, which
automatically appears in the utility. To isolate the operation to a specific subset
Track View Utilities | 3625