2009

Procedures
To use Randomize Keys:
1 Highlight one or more keys, or a block of time, in one or more tracks.
In Dope Sheet > Edit Keys mode, all selected keys are affected. In Edit
Ranges mode, the keys in the selected tracks that are within the selected
range of time are affected. In Curve Editor mode, the selected keys on
selected curves are affected.
2 From the Utilities menu, choose Track View Utilities, and then choose
Randomize Keys.
The Randomize Keys utility is displayed.
3 By default, both Randomize Time and Randomize Value are on. Turn off
either if you wish.
4 Set the +/- spinners to specify the desired range of randomized offset.
5 Click Apply.
Interface
Randomize Time Randomly shifts values in time, based on the spinner
settings. For example, if the + spinner is set to 20, and the - spinner is set to
10, the values could shift up as much as 20, and down as much as 10.
+ The amount of random shift in a positive direction.
Track View Utilities | 3621