2009

The tracks are changed, now marked with a black key in a circle. These
tracks will not receive keyframes. Only the tracks marked with red keyable
icons will.
NOTE Keyable tracks work with both Auto Key and Set Key animation modes.
To make multiple tracks keyable:
1 In Track View, with the object selected, hold down the Ctrl key and click
each track to create a selection set of tracks for which you want to prevent
animation. This can be for one or multiple objects
TIP You can hold down the Shift key to select a group of sequential tracks
at once. Alternately you can hold down the Alt key to select all tracks at the
same level as a given track at once.
NOTE If you select just a parent track such as Position, Controller > Keyable
will toggle all of its sub-tracks, even if they’re not selected.
2 From the Controller menu, choose Keyable.
The selected tracks are now defined as keyable.
3 From the Display menu, choose Keyable Icons.
The keyable icon appears next to the tracks. The icon appears red for the
tracks that are keyable, and black for the ones that are not.
TIP Use the same procedure to make multiple tracks not keyable. The
Controller > Keyable command toggles the keyability of the tracks.
NOTE If you have a mixed keyable situation it will toggle the state of the first
track and then set all remaining tracks to match the value of the first track
Hide/Show Non-Selected Curves
Main toolbar > Curve Editor (Open) > Display > Hide Non-Selected Curves or
Show Non-Selected Curves
These commands either hide or show function curves that are not selected in
the controller window.
Track View Menu Bar | 3565