2009

Reduce Keys Reduces the amount of keys on curves, or in edit keys mode in
Dope Sheet. See
Reduce Keys on page 3640.
Move Moves keys either vertically (in value) or horizontally (in time). See
Move Keys (Dope Sheet) on page 3613 or Move Keys (Curve Editor) on page
3652.
Slide Moves keys, and adjacent keys slide away to make room for the move.
See
Slide Keys on page 3614.
Scale Values Proportionally increase or decrease the key values (in space, not
time). Use in combination with the Scale Value Origin Slider. See
Scale Values
on page 3655.
Scale Keys - Time Proportionally increase or decrease the key values (in space,
not time). Use in combination with the Scale Value Origin Slider. See Scale
Keys - Time
on page 3616.
Use Soft Select When turned on, affects keys adjacent to a selection set of
keys according to a falloff threshold. Works on Curves and Dope Sheet edit
keys mode. See
Use Soft Select on page 3553.
Soft Select Settings Use Soft Select Settings to display the dialog that lets you
control the falloff range of the soft selection. Select some keys, then watch
the Track View Key window while you adjust the range value. See
Soft Selection
Settings
on page 3554.
NOTE By default, the Soft Selection dialog appears as a toolbar on the bottom of
the Track View dialog.
Align to Cursor Proportionally increases or decreases the key values (in space,
not time). Use in combination with the Scale Value Origin Slider. See
Align
to Cursor
on page 3610.
Snap Frames When this is on, keys always snap to frames. When off, you can
move keys to sub-frame positions. See Snap Frames on page 3608.
Use Soft Select
Track View > Keys menu > Use Soft Select
When on, Use Soft Select affects keys adjacent to a selection set of keys
according to a falloff threshold. This applies to both Curve Editor keys and
Dope Sheet Edit Keys modes.
Track View Menu Bar | 3553