2009

NOTE As you drag, a dotted line is drawn from the pivot point of the selected
object to the cursor. When the cursor is over a valid follow object, it changes
to a push-pin cursor. Release to set the follow object. The name of the follow
object will appear in the text area.
To unbind an object:
■ Select the object to unbind, and then click Unbind.
In the text area, the name of the follow object is replaced with the word
"None."
Interface
Position group
Bind Position Binds the selected object in the IK chain to the world (attempts
to maintain its location), or to a follow object, if one has been assigned. If a
follow object has been assigned, then the translation of the follow object
affects the IK solution.
NOTE This check box has no effect on the HD IK Solver Position end effectors,
which are always bound to their assigned joints.
Orientation group
Bind Orientation Binds the selected object in the hierarchy to the world
(attempts to maintain its orientation), or to a follow object, if one has been
Hierarchy Panel Commands | 3489