2009

5 Adjust the SDeflector parameters as necessary.
Interface
Particle Bounce group
These settings determine how the deflector affects the bound particles.
Bounce Determines the speed with which particles bounce off the deflector.
At 1.0, the particles bounce at the same speed as they approach. At 0, they
don't deflect at all.
Variation The amount by which each particle can vary from the Bounce
setting.
Chaos The amount of variation from the perfect angle of reflection (found
when Chaos is set to 0.0). 100% induces a variation in reflection angle of up
to 90 degrees
Friction The amount by which particles are slowed as they move along the
deflector surface. A value of 0% means they're not slowed at all. A value of
50% means they're slowed to half their original speed. A value of 100% means
they stop moving when they strike the surface. Default=0%. Range=0% to
100%.
Deflectors | 2753