2009

5 Click the Assign Controller button.
6 Choose Path Constraint from the Assign Position Controller dialog.
7 On the Motion panel, click Parameters.
8 In the Path Parameters rollout, click Add Path.
9 In the viewport, select the Circle.
To edit weight values:
1 Open the Create > Shapes panel and create a Line that is about 120 units
long.
TIP Use the diameter of the Circle to gauge the length of the Line.
2 Select the Sphere.
3 On the Motion panel, open the Path Parameters rollout.
4 Click the Add Path button and select the line.
The Sphere is now affected equally by both paths since the path weighting
defaults to 50
5 Adjust the Weight spinner or enter a numerical value for the weight
value.
To animate weight values:
1 Select the Sphere.
2 On the Motion panel, open the Path Parameters rollout.
3 Turn on the Auto Key button.
4 Select the Line01 from the Path list.
5 Place the time slider at frame 50 and change the Weight of Line01 to 75.
6 Move the time slider at frame 100 and change the Weight of Line01 to
10.
7 Select the Circle01 path and change its Weighting to 25.
8 Turn off Auto Key and play the animation.
Path Constraint | 3299