2009

List Window Displays waveforms in a list.
Add Adds a new waveform to the end of the list. The default waveform is a
sine wave with a period of 10 frames and with an amplitude of 100.
Insert Inserts a new waveform before the selected waveform slot.
Remove Deletes the selected waveform. This is not available when only one
waveform remains.
Move Up and Move Down Shifts the selected waveform up and down in the
list, allowing the waveform order to be altered.
Disable Disables the selected waveform.
Waveform group
This group provides control parameters for the currently selected waveform.
TIP Using the Sphere example, you can observe the waveform in the Function
Curve displays of the Track View, and watch changes in the waveform while testing
the parameters described below.
Name Contains the name of the waveform.
Waveform Icons Specifies five waveform types: Sine, Square, Triangle,
Sawtooth, and Half Sine.
Inverted Flips the waveform vertically.
Waveform Controller | 3267