2009

Spring Dynamics rollout
Point group
Mass The mass of the object to which the Spring controller is applied.
Increasing the mass causes the "bouncing" spring motion to become more
exaggerated.
Drag Acts as air friction on the spring motion. A low Drag setting results in
a greater "bouncing" effect, while a high Drag results in subdued bouncing.
Default=1. Range=0 to 10.
Springs group
Add springs to an object using the Spring controller when you want the object
to be affected by the motion of other objects in your scene. This effectively
creates virtual springs between objects.
Add Click this button, and then select one or more objects whose motion
relative to the spring-controlled object will act as springs on that object. To
finish adding springs, click Add again, right-click in a viewport, or press Esc.
Remove Removes highlighted spring objects from the list.
NOTE You cannot remove the Self Influence list entry, which is the
spring-controlled object's influence on itself.
Spring Controller | 3255