2009

Position Reaction controller
The Position Reaction controller has a set of manipulators to control (or simply
display) different reaction values.
Reaction cycle manipulator: Click this to cycle among the various reactions
in the Reactions list. The display of the manipulators and indicators changes
to show their settings for the active reaction.
This manipulator is a small yellow circle that appears in the lower-left corner
of the active viewport, near the icon for coordinate axes.
Influence manipulator: Drag in a viewport to change the manipulator's size,
which changes the reaction's range of influence.
This manipulator is a yellow sphere that turns red when you can drag it. At
the center of the Influence manipulator is the Reaction Value manipulator.
Reaction Value manipulator: Drag in a viewport to change the reaction value,
which for a position track is an XYZ location.
This manipulator is a light blue sphere that appears at the center of the
Influence manipulator.
Object Pivot indicator: Shows the pivot point location of the master object.
This indicator is a dark blue sphere. You can't manipulate it.
Reaction State manipulator: Drag to adjust the reaction state. For position
reactions, the reaction state is an XYZ location that the slave object approaches,
depending on the animation of the master object and the Influence value.
This manipulator is a small green square.
Reaction State indicator: Shows the reaction state value. This indicator is
independent of the square green Reaction State manipulator, which you can
drag in viewports. As you drag the green square, the indicator follows it.
This indicator is a small dark-blue dot.
Rotation Reactors
The Rotation Reaction controller has a single manipulator, which controls
the reaction's Influence parameter.
Influence manipulator: Drag in a viewport to change the manipulator angle,
which changes the reaction's range of influence.
Reaction Controllers | 3245