2009

21 On the main toolbar, click Select And Manipulate, and then drag
the slider pointer all the way to the left, so the slider value reads -100.0.
22 In the Reactions (upper) list, click the Box01 / X Position entry to
highlight it, and then move the box about -50 units on the X axis, to
about X=-100.
Highlighting the slave entry lets you manipulate the slaved value
interactively in the viewport while Create Mode is on. Then, when you
click Create State, a new state is created for that slave only. If you
highlight the master instead, you can manipulate all slaves freely, but
then clicking Create State creates a new state for all slaves. Reaction
Manager is a complex tool, so in general it's best to keep the data as simple
as possible.
23
Click Create State.
Reaction Manager adds a new state, State02, with the state (slider) value
at -100.0 and the box at its new X position.
24 Turn off Create Mode and move the slider left and right to see how it
affects the box position.
Next you'll set a new state so the right half of the slider range affects the
sphere's Hemisphere value.
25
Select the sphere and go to the Modify panel.
The Hemisphere parameter is unavailable, because it's slaved to the slider
value.
Reaction Controllers | 3233