2009
With this dialog, you can save blocks and then load them later. Blocks are
saved as BLK files.
Track View Pick Dialog
The
Track View Pick dialog on page 3286 is displayed when track selection is
necessary; for example, when you click Add in the Master Block Parameters
dialog. Select tracks in the dialog to include in a block. Valid tracks are shown
as darker.
Block Parameters Dialog
After you create a block by clicking Add in the Master Block Parameters dialog
and then selecting tracks in the Track View Pick dialog, clicking OK in the
Track View Pick dialog displays the
Block Parameters dialog on page 3279.
Attach Controls Dialog (Loading Blocks)
The
Attach Controls dialog on page 3276 is displayed when you click Load in
the Master Block Parameters dialog. Tracks in blocks saved previously can be
mapped to tracks in the current scene.
Slave Parameters Dialog (Slave Controller)
Every time a block is created, all tracks within the block are assigned a slave
controller, which allows the MasterBlock to transfer key data. The slave
controller tracks appear with the original tracks you used to create the block.
See
Slave Parameters dialog on page 3284.
MasterBlock Subtracks
Below the main MasterBlock track are subtracks. The first of these is always
Blend. The remaining subtracks are initially copies of the tracks used to create
the block.
Blend track Lets you animate the influence of the block. You can reduce the
block's influence by creating Blend keys with values less than 1.0. Default=1.0.
Block-specific subtracks Display the block name and its associated tracks.
Initially these are copies of the tracks used to create the block. You can edit
keys on these tracks to change the block's behavior.
Block Controller | 3143