2009

See Tangent Types on page 3129 for detailed information on each of the available
tangent choices.
Tangent Copy Copies the tangent type between the tangents of the current
key or between the tangents of the previous and next key. Use the arrow
buttons on either side of the Key Tangent flyouts.
The left arrow of the In tangent copies to the Out tangent of the previous key.
The right arrow of the In tangent copies to the Out tangent of the current
key.
The left arrow of the Out tangent copies to the In tangent of the current key.
The right arrow of the Out tangent copies to the In tangent of the next key.
Choosing Bezier Tangent Types Sets the tangent types for one or more keys
in the same track using the In and Out tangent flyouts.
Bezier Scale Controller (Lock X) Causes the X value to affect all three axes
of scale. The Y and Z values are ignored and their function curves are not
displayed.
When X is locked, the Y and Z values are not affected by changes in the X
value. If you lock X when all three axes are at identical values, alter the X
value, and then unlock X, the Y and Z values remain where they were while
X retains its new value.
Motion panel > Parameters > Key Info (Advanced) rollout
3140 | Chapter 15 Animation