2009

Procedures
To create a target spotlight:
1
On the Create panel, click Lights.
Standard is the default choice of light type.
2 In the Object Type rollout, click Target Spot.
3 Drag in a viewport. The initial point of the drag is the location of the
spotlight, and the point where you release the mouse is the location of
the target.
The light is now part of the scene.
4 Set the creation parameters.
To adjust a target spotlight:
1 Select the light.
2
Use Move on the main toolbar to adjust the light. As an alternative,
right-click the light and choose Move.
Because the spotlight is always aimed at its target, you can't rotate it about
its local X or Y axis. However, you can select and move the target object
as well as the light itself. When you move either the light or the target,
the light's orientation changes so it always points at the target.
NOTE The target’s distance from the light does not affect the attenuation
or brightness of the light.
To select the target:
The target, displayed as a small square, is often in the same area as objects
that you want to illuminate. It can be difficult to select it by clicking.
1 Select the spotlight itself.
2 Right-click the light and choose Select Target from the upper-left (Tools
1) quadrant of the quad menu.
Clicking the line that connects the light and its target selects both objects.
However, region selection doesn't recognize the link line.
Standard Lights | 5053