2009

WARNING Tendons that span several links can conflict with joint intersection
parameters. In these cases, go to the
Link sub-object level on page 4725, and turn
off Active to deactivate the joint intersection parameters for the joints that the
tendon spans. (These controls are in the Joint Intersections rollout on page 4734.)
Pull Bias, Pinch Bias, Stretch Bias Set the upper boundary falloff effect for
these tendon parameters. Values of 0.0 have no effect. Increasing the value
shifts the Pull, Pinch, or Stretch effect toward the child. Default=0.5.
Lower Boundary Conditions group
Connect to Parent Link When on, allows tendons to affect the parent link.
This lets you connect tendons across several links. Otherwise, there is a
boundary between the links where no tendon effect occurs. Default=off.
Lower Bound Sets the lower boundary overlap. Lower Boundary values less
than 0.0 affect the parent link. Default=0.0.
WARNING Tendons that span several links can conflict with joint intersection
parameters. In these cases, go to the
Link sub-object level on page 4725, and turn
off Active to deactivate the joint intersection parameters for the joints that the
tendon spans. (These controls are in the Joint Intersections rollout on page 4734.)
Pull Bias, Pinch Bias, Stretch Bias Set the lower boundary falloff effect for
these tendon parameters. Values of 0.0 have no effect. Increasing the value
shifts the Pull, Pinch, or Stretch effect toward the parent. Default=0.5.
4752 | Chapter 17 character studio