2009

TIP As a general rule, leave the tendon values at 1.0 when the tendon is attached
to a nearby link. For example, leave them at 1.0 between the upper spine (at the
chest) and the arms. Reduce the Pull, Pinch, and Stretch values to reduce the
tendon's effect when the tendon is attached to a more distant link. For example,
reduce them between a lower part of the spine and the arms.
Edit Commands group
Attach To attach a point, select the point, click to turn on Attach, then in a
viewport, click a different link.
Detach At the Control Point selection level, detaches the tendon of the selected
control point. At the Cross Section selection level, detaches all of the cross
section's attached tendons. At the Link selection level, detaches all attached
tendons on all cross sections of the selected link.
Upper Boundary Conditions group
Connect to Child Link When on, allows tendons to affect the child link.
This lets you connect tendons across several links. Otherwise, there is a
boundary between the links where no tendon effect occurs. Default=off.
Upper Bound Sets the upper boundary overlap. Upper Boundary values greater
than 1.0 affect the child link. Default=1.0.
Physique User Interface | 4751