2009

Delete Control Points Deletes control points. First select the control
points in the Cross Section view, and then click this button.
Previous Link and Next Link Move to the next or previous
link in the hierarchy. The Cross Section and Profile views update to display
the appropriate bulge geometry.
IMPORTANT Profile view displays the parent link on the left and the child link on
the right.
Mirror Selected CS Mirror the cross section across the vertical plane
running between the green profile reference points at the top and bottom of
Cross Section view. In other words, clicking this button causes the bulge to
appear on the opposite side of the link.
Select and Translate CS Lets you select and move a cross section along
its link. The bulge on the mesh migrates up and down the link as the cross
section is moved.
Insert Cross Section Slice Lets you insert a cross section by clicking
Profile view in the location you want the cross section to appear. A new cross
section is created where you clicked, on either the parent or the child link.
Extra cross sections give you more control of how and where the mesh bulges.
Delete Cross Section Slice Deletes the currently selected cross section.
First, select the cross section in Profile view.
Copy Selected CS Copies the selected cross section.
You can copy a cross section from one link to another link. Create a new bulge
angle with an appropriate cross section in the target link first, then copy the
cross section parameters form the source cross section, select the target cross
section, and click Paste Selected CS.
Paste Selected CS Pastes copied cross section parameters onto another
cross section.
4694 | Chapter 17 character studio