2009

5 To move to the adjacent cross section within the current
bound, click Next or Previous.
TIP You can also use the Control Point level to individually transform
cross section control points.
To copy an envelope and its settings to a mirrored link (for example, from
one thigh to the other):
1 Select the source link.
2 In the Edit Commands group, click Copy.
The envelope settings are saved in a buffer.
3 Select the mirror link, and then in the Edit Commands group, click Paste.
The envelope is applied to the opposite link, but without mirroring. It is
now the currently selected envelope.
4 In the Edit Commands group, click Mirror.
The selection flips about the mirror axis.
5 Use the Rotate transform on the Main toolbar to rotate the selection to
its final orientation.
Fine-Tuning Envelopes
Once you have adjusted inner and outer bounds of envelopes at
the Envelope Sub-Object level, you may find you need still finer control:
choose either the Cross Section or Control Point selection level in the Blending
Envelopes rollout.
Using Cross Sections
Both inner and outer envelope bounds are like hulls about ribs, the cross
sections. For each envelope, there are by default four cross sections you can
use to alter the envelope's shape.
Using Physique | 4637