2009

Interface
Clip Name The clip name as it appears in the Motion Flow Graph.
File Name The path and file name of the motion clip.
Length The length of the clip in frames.
Browse Displays a load file dialog. Browse for a motion file.
Set lowest starting foot height to Z=0 (.bip files only) Sets the lowest starting
foot height to Z=0. This is an option in the Load File dialog. Default=On.
In character studio the height of a motion clip can be retained. This is
important if you want to retain the height of a motion clip for motions adapted
to characters of different sizes. If, for example, the character is jumping off a
rock and you want to retain the Z position of the character, you would turn
this option off. Leave this option off if Motion Flow motions must be blended
that begin and end at different heights, such as three clips that have the
character mounting a bicycle, riding the bicycle, and dismounting the bicycle.
Turning off this option can, however, cause a jump in the motion during
motion flow transitions. Turn this on for smooth transitions in Motion Flow
mode. If adaptation takes place, the height is set so that the lowest foot at
frame 0 starts at the Z=0 height. This lines up clips along the Z axis and creates
smooth transitions.
Start Frame Sets the start frame for the clip.
End Frame Sets the end frame for the clip.
Active Activates the clip. Inactive clips display as a green color in the Motion
Flow Graph.
Motion Flow Mode | 4573