2009

Interface
Timing group
On Time/Off Time The numbers of the frames in which the space warp begins
and ends its effect. Because Motor moves the objects to which it's applied over
time, no keyframes are created.
Strength Control group
Basic Torque The amount of force exerted by the space warp.
N-m/Lb-ft/Lb-in Specify the unit of measure for the Basic Torque setting,
using common world measurements of torque. N-m stands for Newton meters,
Lb-ft stands for pound-force feet, and Lb-in stands for pound-force inches.
Feedback On When on, the force varies depending on the speed of the affected
objects relative to the specified Target Speed. When off, the force remains
constant, regardless of the speed of the affected objects.
Reversible When on, if the object's speed exceeds the Target Speed setting,
the force is reversed. Available only if you turn on Feedback On.
Target Revs Specifies the maximum revolutions before the feedback takes
effect. Speed is specified in units traveled per frame. Available only if you turn
on Feedback On.
Forces | 2699