2009

Stride Width=1 and Stride Width=3
Actual Stride Width Sets the stride width in modeling units. Changes to this
setting automatically change the Parametric Stride Width.
Total Distance Displays the total distance the footsteps will travel with the
current settings. This value cannot be changed directly.
OK Creates footsteps with the current settings.
Cancel Cancels footstep creation.
Default Resets the values on the dialog to default values.
Timing group
Auto Timing Sets timing parameters automatically. Auto Timing affects the
following timing parameters for the Walk gait:
■ Walk footstep, Double Support
When Auto Timing is selected, these parameters are automatically adjusted
to reasonable values. Control the footstep sequence by adjusting the Stride
Length and Time To Next Footstep parameters.
When Auto Timing is off, you can control the footstep sequence by
adjusting the gait timing parameters, but you can't change the Time To
Next Footstep parameter.
Interpolate Control acceleration or deceleration of the series of footsteps.
When this box is selected, a second set of step parameters under Last Step is
enabled.
Biped creates footsteps starting with the values of the parameters under First
Step and ending with the values of the parameters under Last Step.
4444 | Chapter 17 character studio