2009

Create Opposite Xtra Click to create another Xtra tail on the
opposite side of the biped. First you must use the list to select the original
Xtra tail’s name, and the original must not already have an opposite tail.
Synch Selection When on, any Xtra tail selected in the list is selected
in viewports, and vice versa.
Select Symmetrical When on, selecting one tail selects the tail’s
opposite as well.
Xtra name field Displays the name of the new Xtra tail. Edit this field to
change the default name of the Xtra tail.
List of xtras Lists the biped’s Xtra tails, by name.
Links Sets the number of links in the tail. Default=1.
Parent name field (Motion panel only.) Displays the name of the tail’s parent
object.
Pick Parent (Motion panel only.) Reassigns the parent object. Click
this button to turn it on, then in a viewport, click a different part of the same
biped. The part you pick becomes the tail’s parent.
Reorient to Parent (Motion panel only.) When on, the extra tail moves to
the new parent object, and is oriented to the new parent. When off, assigning
a new parent does not move the tail. Default=on.
Footstep Mode Rollouts
Footstep Mode
Select a Biped. > Motion panel > Biped rollout > Footstep Mode
Biped User Interface | 4433